1. Rail electric transfer carts must be operated and maintained by dedicated personnel, and non-operators are not allowed to use them at will.
2. Before operation, the operator must check whether there are obstacles on the rail and whether the electrical lines and control switches are safe and reliable.
3. The rail electric transfer cart can only start smoothly after the bell rings. Pay attention to whether there are any abnormalities around you and be ready to stop at any time. Don't collide with the rail terminal.
4. The cart should drive slowly during operation, and it is not allowed to change the driving direction at high speed.
5. It is prohibited to perform maintenance and cleaning work on the rail electric transfer cart during operation.
6. When checking in items, no overloading is allowed, and the items should be stacked evenly.
7. If there is a sudden power outage during work, the control switch should be reset to zero. After the work is completed, the power supply must be cut off. Remove the load and clean the equipment.
8. After the rail electric transfer cart is inspected and repaired, it must be accepted by the user unit and meet the safety requirements before it can be used.
